Dark Reading is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them.Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Attacks/Breaches

2/20/2014
10:37 AM
Vincent Berk
Vincent Berk
Commentary
Connect Directly
Twitter
RSS
E-Mail
50%
50%

Securing Data In 4 (Relatively) Easy Steps

The key to success in information security is finding the 'right' information in all the data you aim to protect.

A cyberattack is like a swelling riverbank, ready to make its way into an enterprise, destroying sensitive data. Many companies spend their security budgets on sandbags, lining them up around networking devices, hoping to keep hackers at bay. However, until you understand what is going on inside your network, you cannot truly protect your data against an attack.

Chief Information Security Officers from large enterprises admit to spending hundreds of thousands of dollars on subscription security intelligence reports. Medium-sized enterprise CISOs say they harvest open source information for their security intelligence. SMBs rarely use security intelligence at all.

The problem with these types of reports is that they don't provide enterprises a real-time view of their networks. They look at all the data inside the company but not the specific information that helps security managers make the best decisions. This creates the potential for a blind spot at the moment network threats are occurring -- and an overwhelming volume of raw data that is nearly impossible to process quickly.

Not all data is created equal

There is a fundamental difference between data and information. Information is gleaned from specific pieces of data, enabling actionable decisions. This means that two individuals might find different bits of information in the same pile of data. As individual objectives and missions differ, different people and organizations will find value in different pieces of data. The goal is finding "the right data" that includes relevant "information."

On the other hand, a lot of data doesn't necessarily mean you have good data. In fact, nearly all of the data will need to be qualified before use by asking specific questions like, how will the data affect your current system when installed. Or, will it block key suppliers? Often times, even the most popular services are used for bad. Google's domain name service (DNS), 8.8.8.8:53, for example, is frequently called out as a command and control channel for malicious code installed in your network by the phisher du jour. Google isn't bad, but good tools can be used for bad purposes.

Finding the right information

The key to success in information security is finding information in all the data. This requires an understanding of what you are protecting (what your mission is) and an understanding of the evolving threat to that mission. Only when you understand the nature of the threats, can you make decisions on what data is "information" and what data is just data.

Here are four steps to help monitor network vulnerabilities and identify the "right information" to protect the security of your data:

Step 1: Identify as many command and control (C2) nodes as possible. You can obtain C2 address information from any number of sources. Collective Intelligence Framework is a good starting place, but it won't necessarily give you targeted adversary information. Open sources will yield the same information, but with far more false positives. Sometimes the best option, however, is to pay for a good list.

Step 2: Install C2 nodes in a perimeter-based network flow monitoring and analysis suite. Network flow monitoring and analysis suites will monitor communications to and from your network and alert you when users on your network are communicating (knowingly or unknowingly) with bad IP addresses or domains.

Step 3: Place inexpensive client-based monitoring solution inside your network. Do this for a period of time (usually about 30-60 days) to help identify root cause, patient zero, and areas of weakness. Then, when a network flow is identified communicating with bad actors, use the client-based monitoring system to identify patient zero, and quickly follow the crumb trail across the enterprise looking for indications of other compromised machines.

Step 4: Be ready to pull egregious internal offending computers off the wire. Don't be surprised if you find a few. When you identify "badness," the client-based monitoring system can be used to perform initial triage, but you still may want to pull the boxes for analysis to figure out how bad it really is.

Monitoring your network for the "right information," shows you where your current levy is leaking in real-time. More so, you'll save money on the software and hardware "sandbags" that offer little more than a false sense of security.

Dr. Vincent Berk, is CEO of FlowTraq. Dr. Berk has 15+ years of IT security and network management experience, and is the designer of the FlowTraq system.

Jeffery L. Stutzman, CISSP and the Chief Operations Officer and Vice President of Collaborative Research and Analysis for Red Sky, also contributed to this article. Dr. Vincent Berk is CEO of FlowTraq with 15 years of IT security and network management experience. He is a member of ACM and the IEEE. View Full Bio

Comment  | 
Print  | 
More Insights
Comments
Newest First  |  Oldest First  |  Threaded View
SandraP573
50%
50%
SandraP573,
User Rank: Apprentice
11/12/2014 | 6:49:02 AM
securing data
Data security is essential these days and it is very important to encrypt and password protect our personal and professional data with reliable encryption software like Data Protecto. I have used it myself. 
Monitance
50%
50%
Monitance,
User Rank: Apprentice
3/2/2014 | 9:37:17 PM
re: Securing Data In 4 (Relatively) Easy Steps
Great article
COVID-19: Latest Security News & Commentary
Dark Reading Staff 10/23/2020
7 Tips for Choosing Security Metrics That Matter
Ericka Chickowski, Contributing Writer,  10/19/2020
Russian Military Officers Unmasked, Indicted for High-Profile Cyberattack Campaigns
Kelly Jackson Higgins, Executive Editor at Dark Reading,  10/19/2020
Register for Dark Reading Newsletters
White Papers
Video
Cartoon
Current Issue
Special Report: Computing's New Normal
This special report examines how IT security organizations have adapted to the "new normal" of computing and what the long-term effects will be. Read it and get a unique set of perspectives on issues ranging from new threats & vulnerabilities as a result of remote working to how enterprise security strategy will be affected long term.
Flash Poll
How IT Security Organizations are Attacking the Cybersecurity Problem
How IT Security Organizations are Attacking the Cybersecurity Problem
The COVID-19 pandemic turned the world -- and enterprise computing -- on end. Here's a look at how cybersecurity teams are retrenching their defense strategies, rebuilding their teams, and selecting new technologies to stop the oncoming rise of online attacks.
Twitter Feed
Dark Reading - Bug Report
Bug Report
Enterprise Vulnerabilities
From DHS/US-CERT's National Vulnerability Database
CVE-2020-13100
PUBLISHED: 2020-10-26
Arista’s CloudVision eXchange (CVX) server before 4.21.12M, 4.22.x before 4.22.7M, 4.23.x before 4.23.5M, and 4.24.x before 4.24.2F allows remote attackers to cause a denial of service (crash and restart) in the ControllerOob agent via a malformed control-plane packet.
CVE-2020-25470
PUBLISHED: 2020-10-26
AntSword 2.1.8.1 contains a cross-site scripting (XSS) vulnerability in the View Site funtion. When viewing an added site, an XSS payload can be injected in cookies view which can lead to remote code execution.
CVE-2020-7751
PUBLISHED: 2020-10-26
This affects all versions of package pathval.
CVE-2020-27678
PUBLISHED: 2020-10-26
An issue was discovered in illumos before 2020-10-22, as used in OmniOS before r151030by, r151032ay, and r151034y and SmartOS before 20201022. There is a buffer overflow in parse_user_name in lib/libpam/pam_framework.c.
CVE-2020-27388
PUBLISHED: 2020-10-23
Multiple Stored Cross Site Scripting (XSS) vulnerabilities exist in the YOURLS Admin Panel, Versions 1.5 - 1.7.10. An authenticated user must modify a PHP plugin with a malicious payload and upload it, resulting in multiple stored XSS issues.