Dark Reading is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them.Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Physical Security

// // //
10:00 AM
Connect Directly
E-Mail vvv

4 Integrated Circuit Security Threats and How to Protect Against Them

Little-understood threats involving the IC supply chain are putting organizations around the world at risk.

Today's computing systems are up against an extraordinary volume of threats, and many of them target where these systems originate — in the supply chain and around critical integrated circuits (ICs). In fact, according to the ITRC, supply chain attacks impacted 694 entities in 2020, which ultimately affected more than 42 million individuals. Therefore, you can't overstate the importance of understanding and addressing supply chain risks proactively. The best way to do this is to assess all potential attack vectors throughout the life cycle of an IC and a computing system. 

Related Content:

Hardening the Physical Security Supply Chain to Mitigate the Cyber-Risk

Special Report: Building the SOC of the Future

New From The Edge: 5 Mistakes That Impact a Security Team's Success

There is a wide range of possible attacks throughout every stage of the IC life cycle. This can make ensuring the integrity of a computing system from end to end extremely challenging. To better understand these challenges, let's explore some key IC supply chain threats and how to protect against them.

Four Lesser-Known Supply Chain Threats
There are a variety of known supply chain threats, and they continue to evolve quickly. These attacks can happen across the various stages of the component life cycle, from design, integration, and fabrication to testing, provisioning, and deployment. While some are more commonly known — such as insider threats, malicious third-party plug-ins or design tools, design network attacks, malicious hardware and firmware, reverse engineering of components, physical alteration in transit, and fictitious recycling — let's focus on some of the lesser-known vectors.

1. Design Alteration — Design modifications might occur during several different stages by various actors. A supplier might suggest a seemingly innocuous change that can induce an undefined state of execution in the system. An integrator might make a covert change to the design files provided as part of an integration effort. Some believe that design alteration was the end goal of the AutoCAD malware, and more recently, it played a role with SUNSPOT in the SolarWinds attack.

How can you mitigate this threat? Consider isolating design networks from traditional corporate networks, restrict third-party plug-in usage to trusted sources, and cryptographically validate all design tools, updates, and plug-ins before installation. Also, companies should use internally maintained repositories of design tools and use blockchain technology (or some other auditing tool) to create a ledger of all access events and modified design files.

2. Trojan Circuitry Insertion — While still mostly an academic case, there's evidence that multiple hardware Trojans exist but are not yet activated. Activation would expose the Trojan, so an attacker would wait to produce the biggest impact before triggering it. Trojan circuitry might occur during one of several different phases. Beyond Trojan circuitry in malicious hardware, other circuitry modifications could be made directly to printed circuit boards (PCBs). The result might be disclosure of sensitive information, control of the system, or part of a larger, multistep Trojan activation sequence. You can learn more about hardware Trojan insertion on IEEE or in this recent DEF CON presentation.

How can you mitigate this threat? Consider the following mitigations: Use X-ray or other imaging tools to verify individual layers of PCBs to ensure authenticity and integrity. Create power analysis tests to look for significant variations in consumption across a broad set of operations. Create logic tests to look for changes in execution across a broad set of operations. Reverse engineer a small group of devices from each manufacturing facility and analyze them for variations. Use multiple manufacturing facilities or at least one separate trusted facility for a set of "golden" reference products.

3. Trojan Component Insertion — If an attacker cannot directly impact the original component or authorized third-party parts, they might resort to attacking the supply chain of authorized, third-party partners or fabrication facilities. An attacker might create a Trojan component and insert it into a product created by the third party or at the fabrication facility. There have been several proofs of concept over the last few years to illustrate how easily this can happen. Check out this IEEE paper for more information.

How can you mitigate this threat? The latest research supports using visual inspection tools, both manual and automated, to verify there are no extraneous or unexpected components on the end device. Additionally, you can test multiple systems looking for variations such as function, power, and boot time. And again, consider using multiple manufacturing facilities or a separate facility to produce trustworthy reference products.

4. Component Replacement — A Trojan component is a device that has been made to look and function identically to a valid component but has some level of additional functionality that performs a malicious action when triggered. These devices might be easily distinguishable when powered on due to power draw or throughput deviations from the norm, yet can easily slip through during stages involving visual validation. This could cause partners responsible for populating PCBs to receive a mixture of malicious and benign components. Depending on the complexity of the component, someone with physical access to completed products could do this either during the original manufacturing of the overall product or at any point during distribution. This is something that DARPA has been fighting against for some time.

How can you mitigate this threat? Consider using both manual and automated visual inspection tools to test for deviations in product characteristics, such as the font and location of product labels or physical dimensions of the product. And don't forget to test components periodically and randomly to look for significant differences in power, timing, or functional performance.

Supply chain attacks are one of today's most pressing threat categories. Unfortunately, they're not always immediately obvious or detectable. That said, you can address many of them through stricter internal supply chain policies, more expansive monitoring, and more significant requirements on integrated logic.

This is the first part of a two-part article. The second part is here

Dr. Matthew Areno is a Principal Engineer at Intel Corporation in Security Architecture and Engineering group. Areno completed his Bachelor's and Master's degrees at Utah State University in 2007 and took a position with Sandia National Labs. At Sandia, he focused on ... View Full Bio
Comment  | 
Print  | 
More Insights
Oldest First  |  Newest First  |  Threaded View
Visit the Web's Most Authoritative Resource on Physical Security

To get the latest news and analysis on threats, vulnerabilities, and best practices for enterprise physical security, please visit IFSEC Global. IFSEC Global offers expert insight on critical issues and challenges in physical security, and hosts one of the world's most widely-attended conferences for physical security professionals.

I Smell a RAT! New Cybersecurity Threats for the Crypto Industry
David Trepp, Partner, IT Assurance with accounting and advisory firm BPM LLP,  7/9/2021
Attacks on Kaseya Servers Led to Ransomware in Less Than 2 Hours
Robert Lemos, Contributing Writer,  7/7/2021
It's in the Game (but It Shouldn't Be)
Tal Memran, Cybersecurity Expert, CYE,  7/9/2021
Register for Dark Reading Newsletters
White Papers
Current Issue
The 10 Most Impactful Types of Vulnerabilities for Enterprises Today
Managing system vulnerabilities is one of the old est - and most frustrating - security challenges that enterprise defenders face. Every software application and hardware device ships with intrinsic flaws - flaws that, if critical enough, attackers can exploit from anywhere in the world. It's crucial that defenders take stock of what areas of the tech stack have the most emerging, and critical, vulnerabilities they must manage. It's not just zero day vulnerabilities. Consider that CISA's Known Exploited Vulnerabilities (KEV) catalog lists vulnerabilitlies in widely used applications that are "actively exploited," and most of them are flaws that were discovered several years ago and have been fixed. There are also emerging vulnerabilities in 5G networks, cloud infrastructure, Edge applications, and firmwares to consider.
Flash Poll
Twitter Feed
Dark Reading - Bug Report
Bug Report
Enterprise Vulnerabilities
From DHS/US-CERT's National Vulnerability Database
PUBLISHED: 2023-03-17
The Bookly plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the full name value in versions up to, and including, 21.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that w...
PUBLISHED: 2023-03-17
The WP Express Checkout plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘pec_coupon[code]’ parameter in versions up to, and including, 2.2.8 due to insufficient input sanitization and output escaping. This makes it possible for authenti...
PUBLISHED: 2023-03-17
A vulnerability was found in SourceCodester Student Study Center Desk Management System 1.0. It has been rated as critical. This issue affects the function view_student of the file admin/?page=students/view_student. The manipulation of the argument id with the input 3' AND (SELECT 2100 FROM (SELECT(...
PUBLISHED: 2023-03-17
A vulnerability classified as critical has been found in SourceCodester Student Study Center Desk Management System 1.0. Affected is an unknown function of the file Master.php?f=delete_img of the component POST Parameter Handler. The manipulation of the argument path with the input C%3A%2Ffoo.txt le...
PUBLISHED: 2023-03-17
A vulnerability classified as critical was found in SourceCodester Student Study Center Desk Management System 1.0. Affected by this vulnerability is an unknown functionality of the file admin/?page=reports&date_from=2023-02-17&date_to=2023-03-17 of the component Report Handler. The manipula...