Storage solutions have come a long way, but there are areas that need improvement. The next two entries I am going to focus on two of those areas; snapshots and high availability. This entry we will pick on snapshots.

George Crump, President, Storage Switzerland

February 13, 2009

3 Min Read

Storage solutions have come a long way, but there are areas that need improvement. The next two entries I am going to focus on two of those areas; snapshots and high availability. This entry we will pick on snapshots.Snapshots sound like the 'be all and end all' for covering yourself from some sort of data disaster but it is an overused term and sometimes can mean different things to different suppliers. For our purposes the file or volume being 'snapped' is comprised of blocks of data. These blocks are organized by an index of pointers or links to the actual blocks on disk. When an application requests data it does not try to find the blocks itself, it is routed to the index for the location. When a snapshot is "taken" you are actually only copying this primary index. This is very small and takes less than a few seconds, if that, to complete. The blocks that are referenced by the snapshot are then put into a read-only mode and can't be changed or deleted.

Typically upon the initial snapshot almost no additional storage is consumed. As the volume is written after the snapshot, new blocks representing those changes are written to the original file or volume and the older blocks that are still under the lock of the snapshot are written to a new area of disk. This is also where data growth begins. The snapshot is not updated and still references the static read-only blocks, allowing you to view that data at a point in time.

OK here is where it get's interesting. Snapshots typically have to reside on the same storage as the original data. That means that if you are using expensive 15k RPM drives for the actual data you are also using expensive 15k RPM drives to store what amounts to a backup of that data. This creates a cost imbalance.

Also in a real world data center there is not just one storage system or SAN, there are multiple. Each one of these require a different snapshot interface with a different set of snapshot scripts, all of which decreases IT efficiency.

Probably most important these snapshots are totally dependent on the primary storage not failing. If you have a corruption on your primary volume, it is destroyed and all your snapshots are destroyed with it.

Finally with many storage systems each successive snapshot you take may take a performance hit on the system. This limits the number of snapshots you can have and lowers your granularity of recovery.

There are solutions. You can leverage a independent virtualization appliance like DataCore's SANsymphony that will bring all your storage under one storage software umbrella or you can use products from companies like InMage and SyncSort that move the snapshot data off of the primary storage platform and onto a secondary storage device as we discussed in our recent article on Driving a Backup ROI.

For more information register for our upcoming presentation on "The State of Backup", getting more from your backup process.

Track us on Twitter: http://twitter.com/storageswiss.

Subscribe to our RSS feed.

George Crump is founder of Storage Switzerland, an analyst firm focused on the virtualization and storage marketplaces. It provides strategic consulting and analysis to storage users, suppliers, and integrators. An industry veteran of more than 25 years, Crump has held engineering and sales positions at various IT industry manufacturers and integrators. Prior to Storage Switzerland, he was CTO at one of the nation's largest integrators.

About the Author(s)

George Crump

President, Storage Switzerland

George Crump is president and founder of Storage Switzerland, an IT analyst firm focused on the storage and virtualization segments. With 25 years of experience designing storage solutions for datacenters across the US, he has seen the birth of such technologies as RAID, NAS, and SAN. Prior to founding Storage Switzerland, he was CTO at one the nation’s largest storage integrators, where he was in charge of technology testing, integration, and product selection. George is responsible for the storage blog on InformationWeek's website and is a regular contributor to publications such as Byte and Switch, SearchStorage, eWeek, SearchServerVirtualizaiton, and SearchDataBackup.

Keep up with the latest cybersecurity threats, newly discovered vulnerabilities, data breach information, and emerging trends. Delivered daily or weekly right to your email inbox.

You May Also Like


More Insights