Vulnerabilities / Threats // Insider Threats
10/5/2012
03:29 PM
50%
50%

How To Choose Best SSD For Midsize Data Centers

Solid-state disk storage effectively boosts performance in nearly any size data center, but midsize data centers have particular affordability questions.

One consistent truth we have seen about solid state disk (SSD) is that the technology can improve performance in almost any size data center. The problem for midsize data centers beginning to explore this technology is how to best afford it. The SSD vendors have a seemingly endless set of options for data centers to consider, but which one is best for the midsize data center?

Overall there are three basic ways to implement flash SSD in the environment. First, SSD can be added or installed to a server's drive bays via drive form factor solid state or via a PCIe card slot. Second, an appliance can be added to the network that either acts as a standalone storage system or as a cache for an existing storage system. And finally, SSD can somehow be integrated into a storage system.

Which one of these you should pick is largely dependent on two factors. First, how many servers are giving you a performance problem? Second, where are you in your storage refresh cycle? If you have one server that is giving you a particular performance problem, then SSD in the server is the quickest and often least expensive fix. First you have to make sure the application can leverage the flash device by having the ability to change hot-file locations, or you have to buy a caching solution (of which there are many now).

We are finding that the scenario of a single application being the only performance problem is becoming increasingly rare as the environment becomes more and more virtualized. This is especially true in the midsize data center, which tends to have much higher virtualized server ratios. If you have several virtualized hosts then a flash/SSD appliance or a hybrid storage system may be a better fit.

Flash/SSD appliances are ideal for adding to an existing infrastructure to extend the life of the current storage system. These flash-only systems have typically been out of reach of the midrange data center. Now, though, we are seeing shareable systems become available at a much lower cost and with a simple software feature set. The expectation is that you will leverage the storage management capabilities within the hypervisor instead of paying for them again in the storage system.

Hybrid systems are a new generation of storage systems that do more than just add flash to existing legacy storage solutions. They are typically custom built to support flash and its performance capability. When the time comes to refresh the storage infrastructure, these systems are well worth considering. As we will discuss in our upcoming webinar, "The Four Advantages to Hybrid Flash Arrays," these systems allow the data center to leverage the use of solid state across a wide range of physical hosts, but still leverage HDD to keep costs in check.

In reality there is no perfect single solution for all midsize data centers; much of the choice depends on where you are in your storage refresh cycle and the design of the environment. Considering that most midsize data center are highly virtualized, any SSD investment will have to have be accessible by multiple server hosts either through local servers to hypervisor coordination on a storage network.

Comment  | 
Print  | 
More Insights
Comments
Oldest First  |  Newest First  |  Threaded View
StorageOlogist
50%
50%
StorageOlogist,
User Rank: Apprentice
10/12/2012 | 9:48:40 PM
re: How To Choose Best SSD For Midsize Data Centers
If you want to read more about how hybrid storage efficiently uses flash then here are a few of blog posts.

"SSD caching explained" http://blog.starboardstorage.c...

"How to choose SSD - How much is enough" http://blog.starboardstorage.c...

"Using SSD for VDI" http://blog.starboardstorage.c...

Register for Dark Reading Newsletters
White Papers
Cartoon
Current Issue
Flash Poll
Video
Slideshows
Twitter Feed
Dark Reading - Bug Report
Bug Report
Enterprise Vulnerabilities
From DHS/US-CERT's National Vulnerability Database
CVE-2015-4293
Published: 2015-07-30
The packet-reassembly implementation in Cisco IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (CPU consumption or packet loss) via fragmented (1) IPv4 or (2) IPv6 packets that trigger ATTN-3-SYNC_TIMEOUT errors after reassembly failures, aka Bug ID CSCuo37957.

CVE-2014-7912
Published: 2015-07-29
The get_option function in dhcp.c in dhcpcd before 6.2.0, as used in dhcpcd 5.x in Android before 5.1 and other products, does not validate the relationship between length fields and the amount of data, which allows remote DHCP servers to execute arbitrary code or cause a denial of service (memory c...

CVE-2014-7913
Published: 2015-07-29
The print_option function in dhcp-common.c in dhcpcd through 6.9.1, as used in dhcp.c in dhcpcd 5.x in Android before 5.1 and other products, misinterprets the return value of the snprintf function, which allows remote DHCP servers to execute arbitrary code or cause a denial of service (memory corru...

CVE-2015-2977
Published: 2015-07-29
Webservice-DIC yoyaku_v41 allows remote attackers to create arbitrary files, and consequently execute arbitrary code, via unspecified vectors.

CVE-2015-2978
Published: 2015-07-29
Webservice-DIC yoyaku_v41 allows remote attackers to bypass authentication and complete a conference-room reservation via unspecified vectors, as demonstrated by an "unintentional reservation."

Dark Reading Radio
Archived Dark Reading Radio
What’s the future of the venerable firewall? We’ve invited two security industry leaders to make their case: Join us and bring your questions and opinions!